Smart Home Devices

Wemo Smart Plug Stuck in Reset Mode? Here's the Fix

Wemo Smart Plugs are a useful addition to any home automation system, allowing you to control your appliances with your voice or smartphone. However, sometimes these smart plugs can get stuck in reset mode, making them unusable. If you're experiencing this issue, don't worry – there are a few tricks you can try to fix it.

1. Check your Wi-Fi network

The first step in fixing a Wemo Smart Plug stuck in reset mode is to check your Wi-Fi network. Make sure your router is turned on and broadcasting a signal. If your Wi-Fi network is down, then the smart plug won't be able to connect to it, and it will remain stuck in reset mode.

2. Reset the Smart Plug

If your Wi-Fi network is working correctly, the next step is to reset the Wemo Smart Plug. To do this, unplug the smart plug from the wall and wait for 10 seconds. Then, press and hold the button on the side of the plug for 5 seconds until the light on the plug starts flashing rapidly. This indicates that the smart plug is in reset mode.

3. Reconnect the Smart Plug to Wi-Fi

Once you have reset the Wemo Smart Plug, the next step is to reconnect it to your Wi-Fi network. Open the Wemo app on your smartphone and follow the instructions to set up the smart plug. Make sure you are entering the correct Wi-Fi network name and password. Once the smart plug is connected to your Wi-Fi network, it should work correctly.

4. Update the Firmware

If your Wemo Smart Plug is still stuck in reset mode, it's time to update the firmware. Open the Wemo app and go to the settings menu. From there, you can check if there are any firmware updates available for your smart plug. If there are, follow the instructions to update the firmware.

5. Contact Wemo support

If none of these steps work, it's time to contact Wemo support. They will be able to help you troubleshoot the issue and determine if there is a hardware problem with the smart plug. You can contact Wemo support through their website or by phone.

Conclusion

Wemo Smart Plugs are a convenient and useful addition to any home automation system, but they can sometimes get stuck in reset mode. If you're experiencing this issue, try checking your Wi-Fi network, resetting the smart plug, reconnecting it to Wi-Fi, updating the firmware, and contacting Wemo support. With a little bit of troubleshooting, you should be able to fix the issue and get your smart plug working again.