Smart Home Devices

The Ultimate Guide to Resetting Enbrighten Smart Plug

Enbrighten Smart Plug is a device that allows you to control your home appliances with your smartphone or voice assistant. It is easy to set up and use, but sometimes you may face issues with the device, such as it not responding to commands or not connecting to the internet. In such cases, resetting the smart plug can often solve the problem. In this guide, we will show you how to reset Enbrighten Smart Plug in different scenarios.

Resetting Enbrighten Smart Plug When It Is Not Responding

If your Enbrighten Smart Plug is not responding to your commands, the first thing you should try is to reset it. Follow these steps to reset the device: 1. Unplug the Enbrighten Smart Plug from the power outlet. 2. Wait for at least 10 seconds. 3. Plug the device back into the power outlet. If the device still does not respond, try resetting it to its factory settings.

Resetting Enbrighten Smart Plug to Factory Settings

If resetting the device does not solve the problem, you may need to reset it to its factory settings. This will erase all the data and configurations on the device, so make sure you have a backup of the data if necessary. Follow these steps to reset the Enbrighten Smart Plug to factory settings: 1. Hold down the button on the Enbrighten Smart Plug for 10 seconds. 2. Release the button when the LED light starts flashing rapidly. 3. Wait for the LED light to stop flashing and become solid. The device is now reset to its factory settings. You can set it up again by following the instructions in the user manual.

Resetting Enbrighten Smart Plug When You Change Wi-Fi Networks

If you change your Wi-Fi network or move the Enbrighten Smart Plug to a different location, you may need to reset it to connect it to the new network. Follow these steps to reset the device: 1. Unplug the Enbrighten Smart Plug from the power outlet. 2. Press and hold the button on the device. 3. While holding the button, plug the device back into the power outlet. 4. Continue holding the button for 10 seconds. 5. Release the button when the LED light starts flashing rapidly. 6. Follow the instructions in the user manual to set up the device with the new Wi-Fi network.

Conclusion

Enbrighten Smart Plug is a useful device that can make your life easier by allowing you to control your home appliances with your smartphone or voice assistant. However, sometimes you may face issues with the device, such as it not responding or not connecting to the internet. In such cases, resetting the device can often solve the problem. We hope this guide has been helpful in showing you how to reset Enbrighten Smart Plug in different scenarios. If you have any questions or comments, feel free to leave them below.