Smart Home Devices

Introduction

Installing a smart lock on your home or office door can give you peace of mind and added security. The Schlage Double Cylinder Smart Lock is one of the best options out there. In this article, we will guide you through the steps to install the Schlage Double Cylinder Smart Lock.

What You Will Need

Before you begin the installation process, make sure you have the following tools and materials: - A Phillips head screwdriver - A flathead screwdriver - A measuring tape - A drill - A 2-1/8 inch hole saw - A hammer and chisel - The Schlage Double Cylinder Smart Lock - Screws and bolts that come with the lock

Step 1: Measure Your Door

Measure the thickness of your door and the diameter of the existing bore hole. The Schlage Double Cylinder Smart Lock is suitable for doors that are 1-3/8 inches to 1-3/4 inches thick with a 2-1/8 inch bore hole.

Step 2: Remove the Old Lock

Use a Phillips head screwdriver to remove the screws from the old lock. Once the screws are removed, you should be able to remove the entire lock from the door.

Step 3: Prepare the Door

Use the hammer and chisel to create a recessed area for the lock faceplate and bolt. This area should be slightly larger than the faceplate and bolt and should be deep enough for the faceplate to sit flush with the door.

Step 4: Install the Bolt and Faceplate

Insert the bolt into the hole on the edge of the door and secure it with the screws provided. Place the faceplate over the bolt and secure it with the screws provided.

Step 5: Install the Exterior Assembly

Insert the exterior assembly into the hole on the outside of the door. Make sure the tailpiece is horizontal and facing towards the door hinge. Secure the assembly to the door with the screws provided.

Step 6: Install the Interior Assembly

Insert the interior assembly into the hole on the inside of the door. Make sure the tailpiece is horizontal and facing towards the door hinge. Secure the assembly to the door with the screws provided.

Step 7: Install the Deadbolt

Insert the deadbolt into the hole on the edge of the door and secure it with the screws provided. Make sure the deadbolt is properly aligned with the bolt in the faceplate.

Step 8: Test the Lock

Test the lock by turning the key and making sure the deadbolt moves smoothly. Also, test the lock from the inside by turning the thumb turn. Make sure the lock is operating smoothly.

Conclusion

Installing the Schlage Double Cylinder Smart Lock is a simple process that can be completed in just a few steps. With this lock, you can ensure your home or office is secure and protected. Follow the steps provided in this article to install your Schlage Double Cylinder Smart Lock with ease.